We have completed 1 order for a 3 ton overhead crane from Haiti. This is a HD type single girder overhead crane, the main beam adopts Welded box-section beam, mainly use material Q235B carbon structural steel strong and elegant, easy to maintain. Three-layer painting.
Single Girder Overhead Crane parameters

• Lifting capacity=3T
• Lifting height=9.144m (30ft)
• Span=12.192m (40ft)
• 480V 60Hz 3P
• FEM 2M (ISO M5)
• Pendant and remote control

Note:

• Our offer includes supply of complete crane.
• Installation, commissioning & site testing:not included.
• Crane rail and bus bar system are not included. Quotation can be provided upon client’s request.

Technical information

Lifting capacity
t
3

Lifting height
m
9.144

Span
m
12.192

Speed
Cross traveling speed
m/min
2-20 (inverter control)

Crane traveling speed
2-20 (inverter control)

Lifting speed
0.8-5.0 (inverter control)

Working class
/
FEM2M (ISO M5)

Power supply
V/Hz/Ph
480/60/3

Cross traveling power
KW
0.37

Crane traveling power
2*0.37

Hoisting power
3.0

Total power
4.11

Max wheel load
KN
23.5

Total weight
Kg
2350

Protection class
/
IP54

Insulation grade
/
F

Ambient temperature
/
-20℃~+40℃

Anti-collision system
/
Included

Phase protection relays
/
Included

Limit switch
/
Included

Voltage Low Protect device
/
Included

Emergency stop action
/
Included

Ground fault protection
/
Included

Short-circuit protection
/
Included

Over-heating protection
/
Included

Power-off protection
/
Included

Over-current protection
/
Included

Overload protector
/
Included

Top Quality Buffer
/
Included

Cross Power
/
Festoon Cables

Country of Origin

China

Recommended Crane Rail Specification (not included in the offer)

Type
Top Width(mm)
Bottom Width(mm)
Height(mm)
Weight(kg/m)

P18
40
80
90
18.06

Overhead Crane Finished Installation

(The above picture is for reference to crane model only)

QD type hook bridge crane is a general-purpose bridge crane for trolleys. The crane relies on the longitudinal movement along the direction of the supporting track on the driving beam of the workshop, the lateral movement of the trolley and the lifting of the hook to realize the working process. The common lifting capacity is 5 tons-600t , working level A3A4A5-A8. There are three types of bridge crane operation modes: ground control, control room control and remote control for users to choose.

A5 level is suitable for general machining and assembly workshops, metal structure workshops, mechanical maintenance workshops, etc., where the workload is not very heavy;

A6 and A7 grades are suitable for occasions with frequent work or continuous production or continuous handling, and can also be used as shop-lifting and hoisting in metallurgical and foundry workshops; the operating environment temperature is -20-40 ℃, and the relative humidity is ≤85%;

3t European-spec Single Girder Overhead Crane (HD Model) for sale to Haiti