The single girder overhead crane or single girder bridge crane consists of one girder beam supported on each side by an end truck. The trolley and hoist are most commonly underhung, which means they run on the bridge’s bottom flange. In terms of design, the bridge can be either top running or under running.

For many applications and industries, single girder bridge cranes are the most cost-effective lifting solution. Single girder cranes use less material and are more compact and lightweight than double girder cranes, resulting in significant material, freight, and installation cost savings. Furthermore, because only one bridge beam is required, these systems typically have less deadweight, allowing them to use lighter runway systems and tie into the existing building support structure.
Single girder overhead crane, to be your reliable and economical lifting solution

• The Yuantai Single Girder Overhead Crane has maximum rigidity for a low deadweight. This could reduce the load on the overhead crane runway.
• The most cost-effective design would be your best option for material handling.
• The lifting mechanism for the single girder overhead crane is an electric hoist with high handling speeds, providing you with outstanding geometry and exceptional traveling characteristics.
• High design rigidity and stability, high cost-effectiveness, high efficiency, and good performance

—–

CD/MD wire rope hoist top running single girder ovehread crane design

Top running single girder overhead crane design with FEM standard wire rope hoist

Low headroom single girder overhead crane design with hoist trolley placed at one side of the main girder

Single girder overhead crane design with special designed cd/md type low headroom hoist

————-

Under hung or suspension single girder overhead crane design mounted on your ceiling structure

Ceiling mounted single girder overhead crane  design with CD/MD electric wire rope hoist

Explosion proof top running single girder overhead crane design

Monorail crane , straight and curved monorail hoist crane design

——–

A single girder overhead crane is a type of light duty overhead crane that has three mechanisms: a lifting mechanism, a crane traveling mechanism, and a trolley traveling mechanism. The lifting mechanism is made up of an electric hoist, en electric wire rope or electric chain hoist, a pulley, and a hook. The steel structure of a single girder overhead crane is made up of the main girder frame and the end carriage frame; the main girder is mostly made up of the I beam and steel plates, specifically the top flange, web, and I beam; and crossed Stiffeners are settled within the main girder box. The performance of the single girder overhead crane directly related to the steel structure’s safety and dependability.